home *** CD-ROM | disk | FTP | other *** search
- Path: nntp1.best.com!usenet
- From: Remi Lenoir <remi@dvsystems.com>
- Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.emulations
- Subject: Re: Pentium Bridgeboard.....Would you buy one?
- Date: Sun, 10 Mar 1996 21:56:15 -0800
- Organization: Digital Video Systems
- Message-ID: <3143C07F.C07@dvsystems.com>
- References: <4hoer5$de1@earth.superlink.net>
- NNTP-Posting-Host: pepper.vip.best.com
- Mime-Version: 1.0
- Content-Type: text/plain; charset=us-ascii
- Content-Transfer-Encoding: 7bit
- X-Mailer: Mozilla 2.0 (Win95; I)
-
- Dave Cinege wrote:
- >
-
- <stuff deteled>
-
- > Pentium bridgeboard -
- >
- > 75 - 166MHz Pentium CPU
- > Cache memory
- > 72 Pin simms
-
- That's perfect.
-
- > UVGA on board (that shares system ram, or has 2mb of it's own.)
-
- With a Pentium PC, people -like me- usually run wincrap. And to run
- wincrap you want to have a big and nice display, like 1024x768 @75Hz
- non-interlaced on a 17inch monitor. A cheap 60Hz interlaced thing
- would not be enough for a Pentium.
-
- > 2 16550 serial
- > 1 EPP ECC parallel All on board
- > Floppy controller
- > EIDE controller
-
- That's perfect.
-
- > Features:
- > Works in the 2/3/4000, and 3/4000T.
- > Share Amiga mouse, keyboard, floppy.
- > Built in video switch for single monitor use.
- > Switch over to the IBM side and back with a hot key and icon/screen.
-
- Again, perfect.
-
- > A high retail price of $995 bare. (Meaning it will hopefully be a little
- > lower from your dealer) And say $1495 with 16mb and a 90MHz Pentium.
-
- The price is very far from being an important point -at least for me- as
- I use the BB to work. There a saying -chineese I think- that says:
-
- "If it's expensive you cry once, if it's cheap you cry all your life".
-
- > How important would direct file transfer be to you?
- > How about being able to share the Amiga harddrive? The IBM harddrive?
- Well, here you come to the most important point to me: the software.
- If the Bridgeboard is not totally -and well- integrated in the Amiga, it
- looses most of its interest over a PC (a networked PC for example).
-
- Here is what is very important (to me):
-
- The PC has access to the following Amiga resources (in order of importance):
- - Keyboard
- - Mouse
- - Hard Disk (very important)
- - Parallel ports
- - Serial ports (if technicaly possible)
- - Network cards
-
- The Amiga has access to the following PC resources (in order too):
- - Hard disk (mountable using Cross-Dos for example)
- - Serial ports
- - Parallel ports
- - Audio cards
- - Network cards
-
- Type of access between BB/Amiga:
-
- A mechanism like AREAD/AWRITE is not satisfying, it's only a better
- than nothing solution. What I would like to see is the PC using the
- Amiga resources as it would use any of its own. This would require
- you to write quite a lot of -uneasy to write- software on the PC
- like VxDs for the serial and parallel ports, installable file
- systems for the Hard disks, etc... The same is true for the Amiga.
-
- This is a huge amount of work that requires very skilled windows/DOS
- and Amiga programmers. In the event you do this, you would still have
- people telling you that they can buy a real PC for a hundred dollars
- less at their local wintel store... and they would go for a cheaper
- PC even if it adds another keyboard, another mouse, another *noisy*
- fan, problems to share the monitor, printers, modem, CD ROM, etc...
-
- BUT, if you could write that software for the A2386SX, I think you would
- find an installed based of customers that would be very happy to pay
- for such a software package. You wouldn't have to pay to design a
- Bridgeboard, you would "just" have to finish Commodore's job by writing
- the software the A2386SX deserves.
-
- How much would I pay for that ? well, it depends on how well the
- software is. If you provide a technically correct solution like IFS
- (with the PC being able to recognize long filenames on the Amiga) and
- VxDs on the windows side, device drivers and file systems on the amiga
- side) for at least the Hard Disks and the serial/parallel ports, I
- would be willing to pay up to $150. Add the audio (soudblaster
- compatible) and the network and I would pay up to $200. How many
- persons would be willing to pay -and how much- for that, I have no
- idea.
-
- You could also make a package with an Evergreen clock-tripler.
-
- Comments welcomed!
-
- Regards,
-
- Remi.
-